CtD Launches TruCut Bowling Ball Spinner and Floor System


In case you do not like studying Click on Right here to order The TruCut Surfacing System.

The TruCut ½ HP Bowling Ball Spinner and Surfacing System is essentially the most full solution to preserve and alter the efficiency of your gear.

The Bowling Ball Spinner could also be crucial accent to have as a way to preserve or alter your bowling balls efficiency.  Sanding or sharpening a bowling ball is the primary solution to change a bowler’s ball response.  Creating the Distinction has been engaged on creating a bowling ball spinner for the final 3 years.  We checked out some totally different ideas and prototypes that have been good. However, there was one main hurdle that grew to become troublesome to beat, that was the associated fee. The price to develop and construct one thing that already exists and wasn’t going to appreciably get higher did not make lots of sense. The laborious truth is bowling ball spinners include costly elements and most of that value is within the tooling. They’re additionally heavy, which makes them lower than perfect to ship. So we determined to work with Modern Bowling and use their ½ horse energy ball spinner as the bottom to start out with. We barely modified it for added versatility, and added some equipment and made it an entire package deal.

The Ball Cup Addition 

By means of utilizing the ball spinner we observed that there was not a great place to set a ball on. That is helpful for organising to make use of the spinner or resting it on if you are altering pads.  This concern is the case with most each different private ball spinner accessible.  So we added a ball cup on high of the motor.  This isn’t groundbreaking by any means.  Nonetheless it’s extra of a small refinement that improves the product. 

IMPORTANT NOTE 

DO NOT LEAVE A BALL ON THE BALL CUP WHILE THE BALL SPINNER IS IN OPERATION. 

The TruCut ½ HP Ball Spinner encompasses a single pace motor that rotates the ball 475 RPM’s in a clockwise path.  It additionally has a low vibration aluminum and nylon bowl parts to carry the ball throughout rotation.  It has an in-line on and off swap that’s straightforward to make use of. This product comes with a 5 12 months restricted guarantee on elements and the motor.

 

TruCut Conditioner 

That is an absolute will need to have accent.  It doubles the lifetime of the TruCut sanding pads and offers extra constant slicing.

By correctly utilizing TruCut conditioner with this method. You’ll be able to cut back the necessity to use an exterior tub to catch the splatter left behind from utilizing water with a ball spinner. Click on right here to look at a video on sand a ball with out all of the particles flying in all places.

The TruCut Surfacing System can be utilized for gentle surfacing contact ups on bowling balls. All the best way as much as professional store high quality full resurfacing jobs when wanted. It really works nice on any coverstock materials utilized in bowling, and you may polish any bowling ball together with the extraordinarily laborious to shine Purple Hammer.

Click on right here to look at a video on correctly totally resurface a bowling ball.

The best way to correctly sand a bowling ball with the TruCut Bowling Ball Spinner

  1. Place bowling ball onto the ball spinner with the holes up.
  2. Moist the specified sanding pad with 20-25 sprays of TruCut Conditioner or till the complete pad is moist.
  3. Activate the ball spinner.
  4. Apply the sanding pad to the bowling ball and full one go (one go is from the highest of the ball to the underside of the ball then again to the highest) on the ball WITH LIGHT PRESSURE. An excessive amount of strain will trigger the sanding pad to breakdown in a short time.
  5. Flip off the ball spinner.
  6. Rotate the ball to finish the specified quantity of sides you sand on the bowling ball. Use TruCut Conditioner to maintain the sanding pad moist all through the complete course of. 

NOTE: Sand both sides of the ball equally to verify the bowling ball stays spherical. 



When sanding your bowling ball, DO NOT USE TRUCUT SANDING PADS THE SAME WAY YOU WOULD USE A ABRALON OR SIAAIR PAD. TruCut Sanding Pads will reduce quicker and ought to be used half of the time as different sanding pads.  We advocate touching up your bowling ball each 3-6 video games to maintain the floor in your ball constant.

The chart beneath exhibits what the assorted kinds of sanding pads are labeled vs what they really reduce the bowling ball at.

Sanding Pad Grits Vs. Scan Numbers

Buy Choices 

The TruCut Ball Spinner is paired with the TruCut Surfacing System. This entire system is available in two choices, Superior and Skilled.

The TruCut Surfacing System Superior

The TruCut Bowling Ball Spinner

8oz TruCut Conditioner

10 pack of TruCut Sanding Pads 

(6 inch 80,120,240 Resurfacing Pads 

5 inch 500,1000,1500,2000,3000,4000, P5000D).

TruCut Hand Utilized Polish equipment that encompasses a 4 oz TruCut Hand Utilized Polish Powered by Turtle Wax and a CtD premium sharpening pad.

CtD Surfacing Mitt

Value $440

Or 

The TruCut Surfacing System Skilled 

The TruCut Bowling Ball Spinner

CtD Bowling Ball Floor Scanner V2

(Click on Right here to study extra in regards to the floor scanner)

8oz TruCut Conditioner

10 pack of TruCut Sanding Pads 

(6 inch 80,120,240 Resurfacing Pads 

5 inch 500,1000,1500,2000,3000,4000, P5000D).

TruCut Hand Utilized Polish equipment that encompasses a 32 oz TruCut Hand Utilized Polish Powered by Turtle Wax and a CtD premium sharpening pad.

CtD Surfacing Mitt

Value $875

With buy you can even join a month-to-month provide of seven Sanding Pads 500, 1000,1500, 2000,3000,4000, P5000D auto shipped to your deal with for the discounted value of $30 monthly.  This plan is just accessible with the acquisition of The TruCut Surfacing System.

Have a query on get again the manufacturing facility meant floor?

Click on Right here to see the newest data and a chart on restore the manufacturing facility end on a bowling ball for all main manufacturers. 

Bowling Ball Manufacturing unit End to TruCut Ending Information

Click on right here to order The TruCut Ball Spinner and Surfacing System.

The TruCut Surfacing System Superior CLICK THIS LINK

 

The TruCut Surfacing System Skilled CLICK THIS LINK

 

 

Leave a Reply

Your email address will not be published. Required fields are marked *